LOGIN/ SIGN UP WHAT'S NEW Products Brands Industries Resources About Us Value Proposition PORTAL LOGIN
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety AccessoriesInsulating BlanketsInsulating Glove KitInsulating GlovesInsulating Sleeves
Emergency ResponderFR HoodsFire & Rescue GlovesFire & Rescue Goggle
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionEyewear AccessoriesFace ProtectionSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidEyewashFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical ResistantCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHi Performance GloveLeather DriversLeather Palm GlovesMetal Mesh GlovesParade GlovesProtection From ColdProtection From Heat
Head ProtectionBump CapsFR HoodsGo-To-Work KitsHard HatsHead Protect AccessoriesSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsE-Flare BeaconFlash Baton
Welding ProtectionFR ClothingHand ProtectionWelding Accessory
WorkwearWork Apparel
promo-tile

Caiman® Kontour™Comfortable Welding Gloves

promo-tile

The Importance of Providing Proper Fitting PPE For Women

promo-tile

Revolutionizing Safety with GORE-TEX Pyrad® for Unmatched Arc-Rated PPE Comfort

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

THE INDUSTRY'S MOST COMPREHENSIVE OFFERING OF COLD WEATHER PPE

promo-tile

Bouton® FogLess® 3Sixty™ Technology

promo-tile

Essential PPE for Contamination Control in High-Sensitivity Manufacturing Environments

promo-tile

G-Tek® Paradox™Ultra-Lightweight 21G Technology

promo-tile

JSP Force Typhoon™ 8 Twin Filter Half Masks with PressToCheck™

promo-tile

ATA Fiber Technology Strength Meets Comfort

promo-tile

PUMA® SAFETY SHOESHIGH-PERFORMANCE SAFETY FOOTWEAR

promo-tile

BioSoft™ THE WORLD'S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

promo-tile

THE BROADEST LINE OF TYPE II HEAD PROTECTION

promo-tile

Bisley® X-Airflow™Breathable Safety Garments

promo-tile

Hand Protection

promo-tile

PPE For Emergency Responders

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

THORZT™ RAPID REHYDRATIONFor the Industrial Athlete

promo-tile

SAFETY IN A FLASHEflare™ Warning Beacons

promo-tile

G-Tek® VRX™ ADVANCED PROTECTION

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

HALF MASK RESPIRATORS REVOLUTIONARY FORCE TYPHOON™8

promo-tile

Kut Gard® ATA® PreventWear™ Cut Resistant Garments

promo-tile

HAND AND ARM PAIRING GUIDE

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

Understanding the Main Differences in Welding JacketsLeather vs. FR Cotton (Q&A)

promo-tile

BOSS® FOOTWEARAdvanced Protection & Comfort

promo-tile

How the New ANSI/ASSP Heat Stress Standard is Intensifying Workplace Safety

promo-tile

Bouton OpticalAdvanced Lens Technologies in Safety Eyewear™

promo-tile

4 HIDDEN JOBSITE RISKS And How To Avoid Them

promo-tile

ARC-RATED PYRAD FABRIC TECHNOLOGY BY GORE-TEX LABS

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

MAKE THE SWAPSustainable Hearing Protection that Doesn't Break the Bank

promo-tile

THE CUT PROTECTION EVOLUTIONWhy It’s Time to Upgrade to A4-A6 Gloves

promo-tile

Barrier Solutions for Clean and Efficient EV Battery Production

promo-tile

Head Protection

promo-tile

COMPARING ADVANCED HEAD PROTECTION SOLUTIONS

promo-tile

PPE For Emergency Responders

promo-tile

Heated Apparel For Cold Climates

promo-tile

THROUGH THE WRINGERHow Industrial Launderable Workwear Stands Up to Mining and Oil & Gas

promo-tile

G-TEK® POSIGRIP MAXLess Effort, More Control.

promo-tile

PIP® WEAR TRIALS

promo-tile

vSeries™ Ear Muffs

promo-tile

WELDING SAFETY SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

BisleyPREMIUM EXTREME COLD WORKWEAR

promo-tile

Natural Disaster Relief PPE EXPECT THE UNEXPECTED

promo-tile

MADE-TO-ORDER SLEEVES Custom Options for Enhanced Performance

promo-tile

ADVANCED HEAD PROTECTION EQUIPMENTfor Safer Construction Sites

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

THORZT™Hydration Solutions Formulation

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

NOVAX ELECTRICAL SAFETYNot All Gloves Are Created Equal

promo-tile

DISASTER RELIEF PPEEssential Protection for Rescue and Recovery Teams

promo-tile

CONTROLLED ENVIRONMENT SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

CUSTOM LOGO SERVICES FAST, EASY & PRECISE

promo-tile

EYE PROTECTION SELECTOR GUIDE

promo-tile

THE HERITAGE LINEPUMA® SAFETY SHOES

promo-tile

Protective Clothing

Protection Does NOT End At The Wrist

PIP® is one of the largest manufacturers of cut resistant arm protection in the USA. Our products are manufactured using a variety of yarns containing advanced fibers such as DuPont Kevlar®, Dyneema® and many other proprietary engineered yarn blends. The use of Cut-Resistant sleeves has increased considerably over the years, and we've led the charge with the introductions of new yarns, sustainable technologies and tailored customizations.

ARM PROTECTION

Cut Resistant Sleeve (30)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
CLEAR ALL
Kevlar Liner
2-Ply Tube Knit

BEST SELLER

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Thumb Hole

10-KSTO

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-24"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-KS12TO, 10-KS22TO
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Armor Blended Blousy Sleeve

10-KVSYBH

  • Cut Level: A6
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Blousy
  • Sizes: 12"-18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A6XX
A6XX

Cut Level: A6
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A6
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
2-Ply Tube Knit

BEST SELLER

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve

10-KS

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 8"-24"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-KS10, 10-KS8
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KASCTOT

  • Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 24"
  • Packed: 144/Case
  • Stock Type: Stock
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Adjustable Velcro Closure and Thumb Hole

10-KSTHV

  • Cut Level: A3
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Seamless Knit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Thumb Hole

10-21KVACPMBKTH

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Rubber

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve

S13ARCGY/N4

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Liner Material: Kevlar
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Size: 18
  • Packed: 72/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
ATPV 15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve

10-BKDS

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-24"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-BKDS14, 10-BKDS24
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21KVBK

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Stock
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply 2x1 Tube Knit

Kut Gard®

AR/FR Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Thumb Hole

10-KAM

  • PPE Category: 2
  • Cut Level: A5
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit
  • Sizes: 12"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A51X
A51X

Cut Level: A5
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ATPV 9.5 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Cotton Inner Layer

10-KSCL

  • Cut Level: A3
  • Ply: 2-Ply
  • Liner Material: Cotton/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Stock
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Tube Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Sleeve

10-KSS

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-KS10S, 10-KS12S
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
PVC

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve with Thumb Hole

S13ARCGY/N4-T

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Size: 18"
  • Packed: 72/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Cotton Liner

10-KANOCL

  • Cut Level: A5
  • Ply: 2-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-20"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 10-KANO10CL, 10-KANO12CL, 10-KANO14CL, 10-KANO16CL, 10-KANO18CL
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit®

10-21KVACPMBK

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Cut and Sewn

BEST SELLER

Kut Gard®

FR Viscose / DuPont™ Kevlar® Blended Sleeve with Blue/Gold Elastic End and Thumb Hole

10-K46

  • Cut Level: A1
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 1
  • Liner Material: FR Viscose/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Blue/Gold Elastic
  • Construction: Cut-and-Sewn
  • Sizes: 22"-26"
  • Packed: 144/Case
  • Stock Type: Stock
A11X
A11X

Cut Level: A1
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A1
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply DuPont™ Kevlar® Sleeve with Leather Patch

10-KSTOLP

  • Cut Level: A3
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 14"
  • Packed: 144/Case
  • Stock Type: Stock
A31X
A31X

Cut Level: A3
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KANO

  • Cut Level: A5
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit®

10-21HACPNY

  • Cut Level: A3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Elastic Thumb

10-21HACPNY-ET

  • Cut Level: A3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Thumb Hole

10-21HACPNYTH

  • Cut Level: A3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KA

  • Cut Level: A5
  • ANSI Contact Heat Level: 3
  • Ply: 2-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Elastic Thumb

15-21KVBK-ET

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
2-Ply Tube Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Sleeve with Thumb Hole

25KTE

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 12"
  • Packed: 200/Case
  • Stock Type: Stock
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Elastic Thumb

10-21KVACPMBK-ET

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Cotton Liner

10-KACL

  • Cut Level: A5
  • ANSI Contact Heat Level: 3
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 18"-24"
  • Packed: 144/Case
  • Stock Type: Stock
A5XX
A5XX

Cut Level: A5
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A5
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 3
Test Method: ASTM F1060-18
Temperature: 392°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Tube Knit

Kut Gard®

Single-Ply DuPont™ Kevlar® Sleeve

25KE

  • Cut Level: A2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 14"
  • Packed: 200/Case
  • Stock Type: Stock
A2XX
A2XX

Cut Level: A2
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Tube Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KAS

  • Cut Level: A3
  • ANSI Contact Heat Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 1
Test Method: ASTM F1060-18
Temperature: 176°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Thumb Hole

15-21KVBKTH

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 15-21KVBK14TH
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Tube Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve

10-KANOS

  • Cut Level: A3
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A3XX
A3XX

Cut Level: A3
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
SHOWING 1-30 OF 30 ITEMS
1 of 1
star What's New
Compare ()
Clear All Compare
Okay, Got it.

Cut-Resistant Kevlar Sleeves

X

ORDER SAMPLE

X

GET FIELD TRIAL